honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Doors - Power Door Lock Cycling|Page 3891 > < Doors - Power Door Lock Cycling|Page 3885
Page 1
background image

Power Door Lock Actuator: All Technical Service Bulletins
Doors - Power Door Lock Cycling

Model

Applicable To

'86-88
ACCORD

ALL

4-Door LX & LX-i

File Under

Bulletin No.
88-004

ELECTRICAL

Issue Date

FEB 17, '88

Power Door Lock "Cycling" (Supersedes 88-004, dated July 29, 1988)

SYMPTOM

The power door lock actuators continue to operate intermittently even though the doors are already locked. This "cycling" usually occurs immediately
after locking the driver's door.

CORRECTIVE ACTION

Replace the power door lock actuator.

1.

Remove the driver's door trim panel as described in the service manual (page 21-5).

2.

Remove the lower bolt and move the window channel out of the way.

3.

Unplug the connector, remove the three screws and the actuator.

4.

Install the new actuator, then check to see that the power door locks work properly.

5.

Fit the window channel back in position then reinstall the door trim panel.

PARTS INFORMATION

Power door lock actuator (switch ass'y, L. door)

H/C 2583789

P/N 72156-SE3-902

WARRANTY CLAIM INFORMATION

Doors - Power Door Lock Cycling|Page 3891 > < Doors - Power Door Lock Cycling|Page 3885