Accord L4-1955cc 2.0L SOHC FI (1987)
Brake Pedal Adjustment
1. Loosen the brake light switch locknut and back off the brake light switch until it is no longer touching the brake pedal.
Pushrod Adjustment
2. Loosen the pushrod locknut and screw pushrod in or out with pliers until pedal is 205 mm (8.07 in.) from floor, WITH CARPET REMOVED.
After adjustment, tighten locknut firmly.
Brake Switch Adjustment
3. Screw in the brake light switch until its plunger is fully depressed (threaded end touching pad on pedal arm). Then back off switch 1/2 turn and
tighten locknut firmly.
CAUTION: Check that the brake lights go off when the pedal is released.
