Accord L4-1955cc 2.0L SOHC FI (1987)
Stop Bolt Installation
3. Install the stop bolt and new sealing washer while pushing in the secondary piston assembly, then tighten the stop bolt.
Snap Ring Installation
4. Install the snap ring while pushing in the secondary piston assembly.
Removing Rod Seal
5. Install a new rod seal.
CAUTION: When connecting the brake pipes, make sure that there is no interference between the brake pipes and other parts.
NOTE: Master cylinder pushrod-to-piston clearance must be checked and adjustments made, if necessary, before installing master cylinder.