Accord L4-1955cc 2.0L SOHC FI (1987)
Engine Oil Pressure: Testing and Inspection
If the oil pressure warning light stays on with the engine running. Check the engine oil level. If the oil level is correct:
1. Remove the oil pressure sender and install an oil pressure gauge.
2. Start the engine and allow to reach operating temperature (fan comes on at least twice).
3. Pressure should be:
Engine Oil Pressure:
Idle: ............................................................................................................................................................................................. 98 kPa (14 psi) minimum
3,000 rpm: ..................................................................................................................................................................................... 373-451 kPa (54-65 psi)
-
If oil pressure is within specifications, replace oil pressure sender and recheck.
-
If oil pressure is NOT within specifications, inspect oil pump and pressure regulator. See:
