Accord L4-1955cc 2.0L SOHC FI (1987)
Headlamp Control Module: Testing and Inspection
Retractor Control Unit Harness Identification
Retractor Control Unit Input Test
INPUT TEST
Remove 13 wire electrical connector from retractor control unit behind left kick panel. Make all measurements at the control unit harness and note the
test requirements for each step.
Retractor Control Unit Output Test
OUTPUT TEST
Reconnect 13 wire electrical connector from retractor control unit behind left kick panel. Disconnect 5 wire connectors from each retractor relay in the
right front corner of the engine compartment. Make all measurements at the control unit harness and note the test requirements for each step.