Accord L4-1955cc 2.0L SOHC FI (1987)
Voltage Regulator: Testing and Inspection
Voltage Regulator Test - Removed From Alternator
Brush Holder And Regulator.
1. Remove the brush holder and the regulator from the alternator (4 screws).
Electrical Hookup For Testing.
2. Connect a D.C. power source, switches and lights to the regulator as shown.
^
L1 for charge warning light.
^
L2 for alternator field coil.
3. Turn OFF SW1 and SW2.
4. Set the variable D.C. power source to 12 V.
Test Result Charts.