Accord L4-2.2L SOHC VTEC (1994)
1. Stick the label containing only the serial number information on the glove box.
2. Stick the remaining two labels on the Anti-Theft Radio Identification Card and on the vehicle's service records.
UNIT REMOVAL
CAUTION:
-
All SRS electrical wiring harnesses are covered with yellow outer insulation.
-
Before disconnecting the SRS wire harness, install the short connector(s) on the airbag(s)
Installing the short connector
-
To avoid accidental deployment and possible injury, always install the protective short connector(s) on the driver's (and passenger's) airbag
connector(s) before working near any SRS wiring.
NOTE: The radio may have a five-digit coded theft protection circuit. Be sure to get the customer's code number before disconnecting the battery.
1. Disconnect the battery negative cable, then disconnect the positive cable.
2. Install the short connector(s):
Driver's Side:
