Accord L4-2.2L SOHC VTEC (1994)
1. Remove the cap and screw, then remove the control knob.
2. Pry out the cover panel with a flat tip screwdriver, then remove it.
CAUTION: When prying with a flat tip screwdriver, wrap it with protective tape to prevent damage.
3. Remove the nuts, then remove the door mirror while holding it.
4. Installation is the reverse of the removal procedure.
Mirror Holder Replacement
Power door mirror:
1. Insert a screwdriver in the mirror housing through the service hole, and loosen the actuator retaining screw.
2. Pull out the mirror holder from the mirror housing.
