Accord L4-2.2L SOHC VTEC (1994)
Roof Rack Frame: All Technical Service Bulletins
Body - Roof Rack End Covers Fall Off
Bulletin No.
94-034
Issue Date
OCT. 10, 1994
Model
1994 - 95
ACCORD
WAGON
Applicable To
ALL with the
ACCESSORY ROOF
RACK
File Under
ACCESSORIES
Roof Rack End Covers Fall Off
PROBLEM
The customer notices the roof rack end covers are loose or missing.
CORRECTIVE ACTION
Follow these instructions when installing new or replacement end covers.
1.
Measure the distance between the end of the roof rail and the shoulder on the end support. It should be 1.5 mm. Without this clearance, you will
not be able to slide the cover on far enough to fully engage the lock.
If the gap is not 1.5 mm, loosen the sleeve nuts with a T-30 Torx driver, reposition the end support, and tighten the sleeve nuts to 9 N-m (0.9 kg-m,
6.5 lb.ft.).
