Accord L4-2.2L SOHC VTEC (1994)
Cruise Control Actuator Solenoid: Testing and Inspection
Actuator Solenoid
Fig. 9 Actuator Solenoid Components
1. Disconnect 4-P connector and measure resistance between terminals, Fig. 9. Resistance will vary with temperature. Specified resistance is at 70°F.
2. Proceed as follows:
a. Measure resistance for vacuum solenoid between B and D terminals. Resistance should be 30.0-50.0 ohms.
b. Measure resistance for vent solenoid between C and D terminals. Resistance should be 40.0-60.0 ohms.
c. Measure resistance for safety solenoid between A and D terminals. Resistance should be 40.0-60.0 ohms.
