Accord L4-2.2L SOHC VTEC (1994)
5. Disconnect the connector from the A/C thermostat.
Remove the four self-tapping screws, two mounting nuts and the mounting bolt.
Disconnect the drain hose, then remove the evaporator.
6. Pull out the A/C thermostat sensor from the evaporator fins.
7. Install in the reverse order of removal. Make note of the following items.
-
Install the A/C thermostat sensor to its original location.
-
If you're installing a new evaporator, add refrigerant oil (Nippondenso: ND-OIL 8, P/N 38899 - PR7 - A01 or Hadsys: Dn. S10X, P/N