Accord L4-2.2L SOHC VTEC (1994)
Distributor Installation
12. Coat a new 0-ring with engine oil then install it.
13. Slip the distributor into position.
NOTE: The lugs on the end of the distributor and its mating grooves in the camshaft end are both offset to eliminate the possibility of installing
the distributor 180° out of time.
14. Install the hold-down bolts and tighten temporarily.
15. Connect the 2-P and 8-P connectors to the distributor.
Ignition Wire Placement
16. Connect the spark plug wires as shown.