Accord L4-2.2L SOHC VTEC (1994)
Impact Sensor: Service and Repair
CAUTION:
-
Do not damage the sensor wiring.
-
Do not install used SRS parts from another car. When repairing an SRS, use only new parts.
-
Replace a sensor if it is dented, cracked, or deformed.
NOTE: The original radio has a coded theft protection circuit. Be sure to get the customer's code number before disconnecting the battery cables.
1. Disconnect the battery negative cable, then disconnect the positive cable.
2. Remove the glove box damper ~see section 20), then remove the glove box.
3. Connect the short connectors to the airbags.
4. Left Dash Sensor:
-
Remove the footrest and steering joint cover, then pull the carpet back and pull the rubber floor pad up.
5. Right Dash Sensor: