Accord L4-2.2L SOHC VTEC (1994)
4. Disconnect the connectors from the switch.
5. Remove the column holder mounting bolts and nuts.
6. Lower the steering column assembly.
7. Center punch each of the two shear bolts, and drill their heads off with a 5 mm (3/16 in drill bit.
CAUTION:Do not damage the switch body when removing the shear bolts.
8. Remove the shear bolts from the switch body.
9. Install the new ignition switch without the key inserted.
10. Loosely tighten the new shear bolts.
11. Insert the ignition key, and check for proper operation of the steering wheel lock and that the ignition key turns freely.
