Accord L4-2.2L SOHC VTEC (1994)
Fig. 3 Passenger Air Bag Disarming
7. Disconnect front passenger air bag 3-P connector from SRS main harness and connect red short connector, Fig. 3.
SRS Main Connector At Fuse Box
8. Using thin blade screwdriver, lift SRS to under-instrument panel fuse connector lid, Fig. 11, then press tab down and slide connector out.
9. Reverse procedure to reactivate system, noting following:
a. Slide harness electrical connector onto fuse panel connections until it clicks, then close connector lid.
b. Ensure all red short connectors have been removed and placed in their holders.
c. Prior to connecting battery ground and positive cables, ensure all supplemental restraint system electrical connectors have been properly
connected.
d. After battery cables have been connected, turn ignition switch to On position. SRS indicator lamp should light for approximately six seconds.
If lamp does not light or remains on longer than six seconds, a system malfunction is indicated. Refer to Testing and Inspection / Procedures
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview
e. Turn radio control to On. When word Code appears on display panel, enter five-digit theft protection code number.
