honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Suspension - Front End Squeaks|Page 4927 > < Suspension - Front End Squeaks|Page 4921
Page 1
background image

Suspension Strut / Shock Absorber: All Technical Service Bulletins
Suspension - Front End Squeaks

Bulletin No.
95-036

Issue Date
OCT 2, 1995

Model
1994-95
ACCORD

Applicable To
JAPAN PRODUCTION ONLY 
(VIN begins with JHM)

File Under
SUSPENSION

Front Suspension Squeak

SYMPTOM

A squeak comes from the front end when driving on a rough road or turning into a driveway.

PROBABLE CAUSE

The bump stop alternately sticks to, then slips on, the shaft of the front damper.

DIAGNOSIS

Try to duplicate and localize the noise by turning into a driveway at a slow speed. Do this several times, and make both left- and right-hand turns. You
may be able to duplicate the noise by pushing down on the front fender. Take care that you do not dent the sheet metal.

CORRECTIVE ACTION

Replace the bump stop with the new part listed under PARTS INFORMATION.

1.

Remove the front wheel.

2.

Disconnect the brake line from the damper assembly. Remove the flange bolts, then remove the damper fork.

3.

Remove the damper assembly from the car.

Suspension - Front End Squeaks|Page 4927 > < Suspension - Front End Squeaks|Page 4921