Accord L4-2.2L SOHC VTEC (1994)
7. Remove the interlock bolt.
NOTE: Apply liquid gasket (P/N 08718 - 0001) to the threads before reassembly.
8. Remove the shift lever, shift arm, and interlock.
NOTE: Turn the shift lever boot so the hole is facing down.
9. Install the shift arm assembly in the reverse order of removal.
NOTE
-
Use liquid gasket (P/N 08718 - 0001).
-
Remove the dirt and oil from the sealing surface.
-
Seal the entire circumference of the bolt holes to prevent oil leakage.
-
If 20 minutes have passed after applying liquid gasket, reapply it and assemble the housings. Allow it to cure at least 20 minutes after
assembly before filling the transmission with oil.
