Accord L4-2.4L (2005)
Power Door Lock Switch: Testing and Inspection
Door Lock Switch Test
Door Lock Switch Test
Passenger's Door Lock Switch
1. Remove the front passenger's switch panel.
-
2-door
-
4-door
2. Disconnect the 10P connector from the front passenger's power window switch.
3. Check for continuity between the terminals.
-
There should be continuity between the No. 2 and No. 9 terminals when the door lock switch is in LOCK position. There should be no
continuity between the No. 2 and No. 9 terminals when the door lock switch is in the neutral position.
-
There should be continuity between the No. 1 and No. 9 terminals when the door lock switch is in UNLOCK position. There should be no
continuity between the No. 1 and No. 9 terminals when the door lock switch is in the neutral position.
4. If the continuity is not as specified, replace the door lock switch.
