Accord L4-2156cc 2.2L SOHC (1991)
2.
Measure the resistance between the antenna collar and body ground.
^
It the resistance is more than 1 ohm, go to CORRECTIVE ACTION, Antenna Collar Replacement.
^
If the resistance is less than 1 ohm, continue with step 3.
3.
Measure the resistance between the antenna tube and the outside contact of the antenna jack.
^
If the resistance is more than 1 ohm, go to CORRECTIVE ACTION, Antenna Tube Replacement.
^
If the resistance is less than 1 ohm, continue with Coaxial Cable Test.
Coaxial Cable Test
1.
Test drive the car to verify the customer's description of the symptom.
^
If the symptom cannot be reproduced, contact the customer for more information regarding the symptom.
^
If the symptom can be reproduced, continue with step 2.
2.
Disconnect the coaxial cable from the antenna and the radio.
3.
Substitute a new coaxial cable. Connect the new coaxial cable to the antenna; then, run the cable on the outside of the car and connect it to the
radio.
4.
Test the radio.