Accord L4-2156cc 2.2L SOHC (1991)
7.
Clean the antenna assembly drain tube with compressed air. Make sure that the tube is clear of dirt and grease.
8.
Remove and discard the screws, nuts, and grounding strap holding the motor to the antenna assembly. Clean the area on the motor housing where
the grounding strap contacts the motor.
9.
Install the new screws, nuts, and grounding strap provided with the replacement tube.
10.
Install the cleaned insulator tube and guide into the replacement antenna tube.
Antenna Tube Replacement (Installation)
Proper alignment of the antenna tube is important so that the antenna collar fits the contour of the car body. If the tube is not properly aligned, the collar
may cause the body to deform when the antenna nut is tightened.
^
If the replacement antenna tube has an alignment mark, go to step 16.
^
If the replacement antenna tube does not have an alignment mark, continue with step 11.
