honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Door Locks - Door Locks Cycle|Page 8317 > < Interior - Sun Visor Damaged By Seat Belt|Page 8307
Page 1
background image

Door Locks: Customer Interest
Door Locks - Door Locks Cycle

Model

1991 ACCORD WAGON

Applicable To

Through VIN 1HGCB9...MA007182

File Under

BODY

Bulletin No.  

91-012

Issue Date 

MAY 3, 1991

Door Locks Cycle from Unlock to Lock

SYMPTOM

When unlocking the driver's door (either manually or with the keyless remote), the doors unlock and then immediately re-lock.

PROBABLE CAUSE

Driver's door latch rod connected to the outside door handle is out of adjustment (too long).

CORRECTIVE ACTION

Adjust the length of the door latch rod.

1.

Expose the door latch linkages by removing the driver's door panel as described in the Service Manual.

2.

Disconnect the rod joint from the outside door handle.

3.

Adjust the joint down until one or two threads of the rod are above the joint, as shown.

4.

Reinstall the rod joint into the attachment point on the outside door handle.

NOTE:

The rod joint should align with the attachment point with minimal rod movement.

5.

Reinstall all remaining parts and check for proper operation.

Door Locks - Door Locks Cycle|Page 8317 > < Interior - Sun Visor Damaged By Seat Belt|Page 8307