honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Keyless Entry - Remote Transmitter Information|Page 8407 > < Keyless Entry - Remote Transmitter Information|Page 8405
Page 5
background image

Batteries for the Transmitter

The battery number is CR2025. Each transmitter uses one battery.

Procedure 3

Programming the Transmitter

This transmitter is not programmable.

Ordering the Transmitter

Transmitters can be ordered only by authorized Honda Dealers. To order a transmitter, you need the vehicle's VIN, the code number from the power
door lock control unit, and the ignition key code number.

The power door lock code number is a five-digit number etched into the plastic case of the control unit (mounted under the driver's seat). The ignition
key code number is a four-digit number stamped on the metal shank of all five original keys delivered with the car.

Replacement transmitters are manufactured to match the code of the keyless entry system. The new ignition key is cut to match the vehicle's ignition
switch, front door locks, tailgate lock, and glove compartment lock.

To order this transmitter, use the controlled parts ordering screen on the HONDANET 2000 system. The transmitters are manufactured in Japan;
delivery takes 4 to 6 weeks.

Batteries for the Transmitter

The battery is not replaceable.

Procedure 4

Programming the Transmitter

Keyless Entry - Remote Transmitter Information|Page 8407 > < Keyless Entry - Remote Transmitter Information|Page 8405