Accord L4-2156cc 2.2L SOHC (1991)
CAUTION: To prevent damage to the motor, apply battery voltage momentarily
Driver's Door Actuator Test
1. Remove the door trim panel.
2. Disconnect the 4-P connector of the actuator.
3. Test actuator operation by connecting battery voltage to the No.1 and No. 2 terminals. Test the actuator in each direction, by switching the leads
from the battery.
CAUTION: To prevent damage to the motor, apply battery voltage momentarily.
5. Check for continuity between the terminals in each switch position according to the table.