Accord L4-2156cc 2.2L SOHC (1991)
ABS Light: Description and Operation
Anti-Lock Brake System (ABS) Indicator Light
The ABS control unit turns on the ABS indicator light when one or more of the below described abnormalities is detected. This is only a partial list.
^ When the operating time of the motor in the power unit exceeds the specified period, 120 seconds.
^ When vehicle running time exceeds 30 seconds without releasing the parking brake lever.
^ When one of the rear wheels is locked during running.
^ When absence of speed signals from any of the four wheel sensors is detected.
^ When the activation time of all solenoids exceeds a given time or an open circuit is detected in the solenoid system.
^ When solenoid output is not detected in the simulated anti-lock brake system operation carried out during running at speeds of 6 mph (10 km/h)
or more.
To check the indicator light bulb, the light is activated when the ignition switch is turned on. It is turned off after the engine is started if there is no
abnormality in the system.