Accord L4-2156cc 2.2L SOHC (1991)
Brake Fluid Accumulator: Service and Repair
Removal and Installation and Disposal
Removal and Installation
Accumulator & Pressure Switch
Fig. 84 Replacing Accumulator & Pressure Switch.
1.
Refer to Fig. 84, when replacing accumulator and pressure switch.
2.
Drain high pressure brake fluid from power unit as described under MAINTENANCE PROCEDURES/RELIEVING ACCUMULATOR
LINE PRESSURE.
3.
Remove flange bolts, then the accumulator from accumulator bracket.
4.
Remove pressure switch bolt and oil bolt, then the pressure switch from accumulator bracket.
5.
Reverse procedure to install.
Disposal
