honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Idle Control System Diagnosis By System|Page 2332 > < Idle Control System Diagnosis By System|Page 2330
Page 1
background image

Idle Speed: Testing and Inspection
RPM Too Low When Warm

Check:

1. Electronic Air Control Valve (EACV) (14)
2. Fuel Injectors (16)
3. Electric Load Detector (20)
4. See IDLE CONTROL SYSTEM (WARM ENGINE RPM TOO LOW)
5. Electronic Control Unit (ECU) (BU)

NOTE:  After each symptom, the system that could be the source of the symptom are listed and should be checked in the order they are listed,
beginning with #1.

(BU) code used when the CHECK ENGINE warning light is on, and the self-diagnosis indicator LED is ON with no "blinks", the back-up system
is in operation.

Self-diagnosis indicator, (LED) blinks (?), will follow associated systems.

Idle Control System Diagnosis By System|Page 2332 > < Idle Control System Diagnosis By System|Page 2330