Accord L4-2156cc 2.2L SOHC (1991)
Function Control Motor: Service and Repair
Fresh Air/Recirculation Actuator
RECIRCULATION CONTROL MOTOR REPLACEMENT
Refer to illustration for component locations and replacement, noting the following:
-
Before reassembly, make sure that the air door and linkage moves smoothly without binding.
-
When reattaching the recirculation control motor, make sure its positioning will not allow the air door to be pulled too far. Attach the
recirculation control motor and all linkage, then apply battery voltage and watch the recirculation control door movement. If necessary, loosen
the holding screw and move the recirculation control motor up or down.
CONTROL ROD ADJUSTMENT
Connect the recirculation control motor connector to the main wire harness and turn the FRE/REC switch to "REC". Hold the air door closed, then
connect the control rod to the clip on the arm.