Accord L4-2156cc 2.2L SOHC (1991)
-
6X100 mm bolt, metric ruler and scribe (for aligning balance shaft).
OPTIONAL, PENDING INSPECTION
-
Water Pump - Replacing the water pump requires removing the timing belt. A thorough examination of the water pump while the timing belt is
removed is highly recommended.
-
Camshaft and Crankshaft Seals - These seals are located behind the timing belt gears. Leakage from these seals can rapidly deteriorate a new
timing belt.
-
Drive Belts - Drive belt removal is required to access the timing belt.
Front Cover And Crank Pulley Installation
-
Adjusting Nut Rubber Seal - Replace if worn.