Accord L4-2156cc 2.2L SOHC (1991)
Throttle Body: Service and Repair
WARNING: Make sure engine is cool before removing throttle body as it is heated with engine coolant.
Throttle Body Assembly Exploded View
1. Remove air intake tube.
2. Remove the throttle cable and, on A/T equipped cars, the A/T throttle control cable.
3. Remove all vacuum hoses, coolant hoses, and electrical connectors.
4. Remove the four 8mm nuts and remove the throttle body.
5. Replace throttle body gasket and reverse above procedure to install.
6. Torque 8mm throttle body nuts to 16 lb-ft (22 Nm).
7. After reassembly, adjust the throttle cable and, on A/T equipped cars, the A/T throttle control cable.
CAUTION: Do not attempt to adjust the throttle stop screw, it is non-adjustable.
