Accord L4-2156cc 2.2L SOHC (1991)
[NOTICE] Check the color code carefully. The retractor will not work properly if the wrong sensor is installed.
29.
Shake the new sensor unit gently. Make sure the actuator and weight move freely. Do not touch the actuator or the weight.
30.
Place the new sensor in the slot in the retractor assembly. Slide it to the right to lock it in place. Make sure the sensor is against the end of the slot.
31.
Set the new cover in place on the retractor assembly. Align the pins on the cover with the holes in the retractor; then push the cover down to set it
in place. Make sure all sides of the cover are seated against the retractor.
