Accord L4-2156cc 2.2L SOHC (1991)
15.
Install the WHT/GRN and BLK wires in the connector.
16.
Install the upper and lower covers on the retractor/buckle assembly. Install the assembly on the seat.
17.
Install the seat in the car. Inspect the seat belt operation; replace the seat belt assembly if it does not work properly:
^
Check that the belts are not twisted or caught on anything.
^
Make sure both belts retract automatically when unlatched.
^
Make sure the belts do not lock when pulled out slowly. They are designed to lock only during a sudden stop or accident.
18.
Turn the ignition switch on and check the seat belt indicator light. Both the light and the beeper should come on for about six seconds when the
driver's lap belt is not latched. If the driver's lap belt is latched, the beeper should not come on, but the light should come on for about six seconds
to remind the driver to have the passengers put on their seat belts.
RECOMMENDED TOOLS
WARRANTY CLAIM INFORMATION
All seat belt components are covered by a lifetime limited warranty.
Operation number:
854185 Left
864185 - Right
Flat rate time:
0.6 hour
Failed part: Civic
- P/N 818A3-SH1-A22ZA
H/C 3239860
Accord
- P/N 818A3-SM1-AO4ZA
H/C 3350758
* Defect code:
L32 [New]
Contention code:
B99
[NEW]
* A defect code beginning with "L" indicates that the repair is covered by the Lifetime Seat Belt Warranty.