Accord L4-2156cc 2.2L SOHC (1991)
6.
Slide the sensor unit to the left to unlatch it from the retractor body. Lift it straight up. Do not touch the flywheel gear.
7.
Look for the R or L stamped on the retractor assembly to verify that it is right or left. Match this with the color code of the replacement sensor
assembly.
NOTICE
Check the color code carefully. The retractor will not work properly if the wrong sensor is installed.
8.
Shake the new sensor unit gently. Make sure the actuator and weight move freely. Do not touch the actuator or the weight.
