Accord L4-2156cc 2.2L SOHC (1991)
Fig. 7 Inspection Connector Location. Accord
2.
On 1992 Prelude and Civic models, with ignition switch off, disconnect 6-P inspection connector from connector cover on crossmember under
passenger seat and connect it to anti-lock brake checker No. 07HAJ-SG0010A or 07HAJ-SG0010B or equivalent, Fig. 7.
Fig. 6 Inspection Connector Location. 1992 Prelude & Civic
3.
On Accord models, with ignition switch off, disconnect 6-P inspection connector from connector cover on the crossmember under passenger seat
and connect it to anti-lock brake checker No. 07HAJ-SG0010A or equivalent on 1991 models or No. 07HAJ-SG0010B or 07HAJ-SG00100 or
equivalent on 1992 models, Fig. 6.
4.
On all models, raise and support vehicle so that all four wheels are off the ground.
5.
Turn ignition switch on, then turn mode selector switch on anti-lock brake checker to ``0.''
6.
With transmission in neutral, rotate each wheel at least one revolution per second and confirm that its respective monitor light on the checker
blinks as wheel is rotating.
7.
If any monitor light fails to blink, check the suspected sensor, its air gap, wiring and connectors.
