Accord L4-2156cc 2.2L SOHC (1991)
Neutral Safety Switch: Service and Repair
1.
Remove floor console cover.
2.
Disconnect electrical connector.
3.
Place shift lever in neutral.
4.
Remove two switch to selector lever control assembly attaching bolts, then the switch.
5.
Reverse procedure to install, noting the following:
a. On all Civic models, position switch slider in NEUTRAL position.
b. On Accord and Prelude models, position switch slider in PARK position.
c. Position switch with selector lever actuator rod inserted in its slot in switch slider.
d. Hook forward end of switch bracket over forward end of selector lever control assembly.
