Accord L4-2156cc 2.2L SOHC (1991)
Power Steering Valve: Service and Repair
Disassembly
CAUTION:
^ Before disassembling the gearbox, wash it off with solvent and a brush.
^ Thoroughly clean all disassembled parts.
^ Always replace O-rings and seals.
^ Replace parts with damaged sliding surfaces.
^ Do not dip seals and O-rings in solvent; coat O-rings with grease or power steering fluid, make sure they stay in position during reassembly, and use
the appropriate special tools to install them where necessary.
1. Remove the O-ring from the valve body unit.
2. Remove the three 6 mm flange bolts, and remove the valve body cap from the valve body.
Cap Seal Removal
3. Remove the cap seal from the valve body cap.
Pressure Control Valve And Spring Removal
4. Remove the pressure control valve and spring from the valve body.
Checking Pressure Control Valve
5. Check the pressure control valve:
^ Inspect its surface for scoring or scratches.
