Accord L4-2156cc 2.2L SOHC (1991)
Gear Box Removal
19. Slide the gearbox right so that the left tie rod clears the bottom of the rear beam, then remove the gearbox assembly.
CAUTION: Be careful not to bend or damage the four power steering lines when removing the gearbox assembly.
Disassembly
1. Remove the valve body unit.
2. Carefully clamp the gearbox in a vise with soft jaws.
3. Loosen the bands, pull the boots away from the ends of the gearbox, and unbend the tie-rod lock washers.
Removing Tie Rods From Steering Rack
4. Hold the rack with a 22 mm wrench, and unscrew the tie-rods with a 17 mm wrench.
Push Cylinder Back Into Housing
5. Push the right end of the rack back into the cylinder housing so the smooth surface that rides against the seal won't be damaged.