Accord L4-2156cc 2.2L SOHC (1991)
1. Install a new O-ring on the piston with its narrow edge facing out.
2. Coat the piston seal ring guide with power steering fluid, then slide it onto the rack, big end first.
Seal Installation Using Special Tool
3. Position the new piston seal ring on the special tool, slide it down onto the big end of the tool, then pull it off into the piston groove on top of the 0-
ring.
Slide Tool Onto Rack And Over Piston Ring
4. Coat the piston seal ring and the inside of the special tool with power steering fluid.
Carefully slide the tool onto the rack and over the piston ring, then rotate the tool as you move it up and down to seat the piston ring.
Installing O-rings On Cylinder Cap
5. Coat new O-ring with power steering fluid and install them on the cylinder cap.
6. Slide the cylinder cap onto the seal retainer and install the snap ring.
