Accord L4-2156cc 2.2L SOHC (1991)
Seating End Seal
13. Push the rack bushing B toward the seal retainer by hand until the cylinder end seal is seated in the retainer. Fit the bushing stopper ring in the
groove of the seal retainer securely.
Installing Retainer Washer On Gear Housing
14. Install the retainer washer on the gear housing.
15. Place the gear housing on the work bench and insert the seal retainer and steering rack into the gear housing.
Pressing Rack Into Cylinder Housing
16. Coat the inside surface of the cylinder with power steering fluid, slide it over the rack and info the gear housing; press it into the housing until it
seats.
