Accord L4-2156cc 2.2L SOHC (1991)
8.
Remove the lower center sash guide and run channel.
9.
Thoroughly clean the lower center sash guide and the run channel. Allow them to dry completely.
10.
Use 3M Weatherstrip Adhesive (black) (see REQUIRED MATERIALS) to attach the run channel to the lower center sash guide. Apply a 50 mm
bead of adhesive to the top portion of the sash guide. Attach the bottom of the run channel with the sash retainer clip.
NOTE:
This is the only adhesive that is effective for this repair. Do not use 3M Super Weatherstrip Adhesive, yellow Hondaline adhesive, or any other
brand of weatherstrip adhesive. They will not hold the seal in place.
11.
Install the sash guide in the door, and reinstall the door panel. Allow the adhesive to set to minutes before operating the window.
CORRECTIVE ACTION - PRELUDE
Reduce the clearance between the center sash guide and window guide pin.
1.
Roll the window halfway down. Check the amount of play in the center sash guide by moving the glass in and out.
