Accord L4-2156cc 2.2L SOHC (1991)
Wiper Switch: Testing and Inspection
Fig. 5 Wiper/Washer Switch Continuity Chart
1.
On models equipped with airbag, disarm airbag as described under Air Bags and Seat Belts / Air Bags (Supplemental Restraint Systems /
Airbag System Disarming).
2.
Remove dash board lower panel and knee bolster.
3.
Disconnect 7-pin connector from main wiring harness.
4.
Check for continuity between terminals in each switch position according to the table in Fig. 5. Replace switch as necessary.
