Accord V6-3.0L (2003)
9. Remove the bolt, then remove the spacer (A).
10. While pulling the outer handle (A), remove the handle from the holes in the door panel. Take care not to scratch the door.
11. Install the handle in the reverse order of removal, and note these items:
-
Make sure the cylinder switch harness is routed properly (for some models).
-
Make sure the cylinder switch connector is plugged in properly (for some models), and each rod is connected securely.
-
Make sure the door key cylinder/door locks operate properly.
-
Make sure the door handle works properly.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its perimeter.
