Accord V6-3.0L (2003)
Trunk / Liftgate Switch: Testing and Inspection
Trunk Key Cylinder Switch Test
Trunk Key Cylinder Switch Test
1. Remove the trunk lid trim.
2. Disconnect the 3P connector from the key cylinder switch.
3. Check for continuity between the terminals.
-
There should be continuity between the No. 2 and No. 3 terminals when the trunk key cylinder switch is in UNLOCK position. There should
be no continuity between the No. 2 and No. 3 terminals when the trunk key cylinder switch is in the neutral position.
4. If the continuity is not as specified, replace the trunk key cylinder switch.