Accord V6-3.0L (2003)
5. Install the trim in the reverse order of removal, and note these items:
-
Check the clips for damage or stress-whitening, and replace them with new ones.
-
Do not reuse the C-pillar cap; always replace it.
-
If the side curtain airbag has deployed, replace the C-pillar trim with new one.
-
To prevent the side curtain airbag from accidentally deploying, removed trim pieces should be checked for these types of damage:
-
Any cracks, deformations, or press-whitenings in the C-pillar trim (A)
-
Any cracks, or press-whitenings in the grommet and clip seating surfaces (B)
-
Bent or broken grommet (C)
-
Replace any damaged parts with new ones.
-
Make sure the top of the trim overlaps with the headliner correctly page.
-
Push the clips and hooks into place securely.
-
Apply medium strength liquid thread lock to the anchor bolt before reinstallation.
-
Before installing the anchor bolt, make sure there are no twists or kinks in the seat belt.
Special Tools Required
KTC trim tool set SOJATP2014
4-door-C-pillar - With Side Curtain Airbags ('04-06 models)
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Remove these items:
-
Rear seat side bolster.
-
Rear door opening trim, as needed.