Accord V6-3.0L (2003)
Fluid - A/T: Service and Repair
ATF Level Check
ATF Level Check
NOTE: Keep all foreign particles out of the transmission.
1. Warm up the engine to normal operating temperature (the radiator fan comes on).
2. Park the vehicle on level ground, and turn the engine off.
NOTE: Check the fluid level within 60-90 seconds after turning the engine off. Higher fluid level may be indicated if the radiator fan comes on
twice or more.
3. Remove the dipstick (yellow loop) from the ATF dipstick guide pipe, and wipe it with a clean cloth.
4. For 2003 model: Insert the dipstick (A) back with pointing the arrow (B) on the cap (C) to the front of the vehicle.
5. For 2004-2007 models: Insert the dipstick (A) back with pointing the arrow (B) on the cap (C) to the front of the vehicle, and aligning the notch on
the cap with the guide tab (D).
6. Remove the dipstick (A) and check the fluid level. It should be between upper mark (B) and lower mark (C).
