Accord V6-3.0L Hybrid (2005)
Garage Door Opener Transmitter: All Technical Service Bulletins
Homelink(R) System - Won't Learn Garage Door Opener Code
04-065
January 7, 2005
Applies To:
See VEHICLES AFFECTED
HomeLink(TM) Unit Does Not Learn the Garage Door Opener Code
(Supersedes 04-065, dated November 5, 2004)
Updated information is shown by black bars and asterisks.
SYMPTOM
The HomeLink(R) Universal Transceiver (HomeLink unit) does not learn your customer's garage door opener code.
PROBABLE CAUSE
Problem during factory programming.
VEHICLES AFFECTED
CORRECTIVE ACTION
Use a Genie(R) brand garage door opener remote transmitter (either fixed code type or rolling code type) to program the HomeLink unit. If you can
program the unit, then clear the learned code, and return the vehicle to your customer. If the unit does not program correctly, replace it.
IMPORTANT:
Some of the affected VINs are still in your dealership inventory. In the interest of customer satisfaction, make sure you do the DIAGNOSIS and
REPAIR PROCEDURE as part of PDI.
TOOL INFORMATION
You need a Genie brand garage door opener remote transmitter. This commercially available unit can be either the fixed code type or the rolling code
type.
To locate a retailer, go to www.geniecompany.com or call 800-654-3643 for assistance.
PARTS INFORMATION
NOTE:
When ordering replacement parts, make sure you order the part that matches the vehicle's interior color. The interior color is listed on the part label
as a color code. The interior color is also listed on the driver's doorjamb sticker as a color type (A, E, G, etc.). This color type corresponds to the
color code on the part.
