Accord V6-3.0L Hybrid (2005)
Navigation Module: Service and Repair
Audio-HVAC Display Module Removal/Installation
Audio-HVAC Display Module Removal/Installation
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the dashboard and related parts.
-
Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.
-
Do not work in a dusty or dirty place.
-
Discharge static electricity from your body before and during the work.
-
Do not touch the circuit board with your bare hands.
-
Do not work with dirty hands.
-
Be careful not to fold the flat plate cable.
-
Do not touch the terminal connector of the flat plate cable with your bare hands. (If you have touched it, wipe it off thoroughly.)
1. Make sure you have the anti-theft codes for the radio and navigation system, then write down the audio presets.
2. Remove the upper panel.
3. Remove the center pocket.
4. With navigation: Remove the navigation control unit
