Accord V6-3.0L Hybrid (2005)
5. Remove the pad retainers (A).
6. Clean the caliper thoroughly; remove any rust, and check for grooves and cracks.
7. Check the brake disc for damage and cracks.
8. Apply a thin coat of M-77 assembly paste (P/N 08798-9010) to the retainers on their mating surfaces indicated by the arrow against the caliper
bracket(B).
9. Install the pad retainers. Wipe excess assembly paste off the retainers. Keep any assembly paste off the discs and pads.
10. Apply Molykote M-77 assembly paste (P/N 08798-9010) to both sides of the shim (A), the back of pads (B), and the other areas indicated by the
arrows. Wipe excess assembly paste off the shims and pads. Contaminated brake discs or pads reduce stopping ability. Keep grease off the brake
discs and pads.
11. Install the brake pads and pad shims correctly. Install the pad with the wear indicator (C) on the inside. If you are reusing the pads, always reinstall
the brake pads in their original positions to prevent a momentary loss of braking efficiency.