Accord V6-3.0L Hybrid (2005)
2. Install the crankshaft pulley, and tighten the bolt. Do not use an impact wrench.
^
1 Hold the pulley with the holder handle (A) and crankshaft pulley holder (B), then tighten the bolt to 64 Nm (6.5 kgf-m, 47 ft. lbs.) with a
torque wrench and a 19 mm socket (C).
^
2 Mark (D) the bolt head and crankshaft pulley as shown, then tighten the bolt an additional 60° (The mark on the bolt head lines up with the
mark on the crankshaft pulley).
3. Install the A/C compressor belt.
4. Install the splash shield.
5. Install the right front wheel.