Accord V6-3.0L Hybrid (2005)
Receiver Dryer: Service and Repair
Receiver/Dryer Desiccant Replacement
NOTE: Install the receiver/dryer as quickly as possible to prevent the system from absorbing moisture from the air.
1. Remove the A/C condenser.
2. Remove the bolts from the A/C condenser, then remove the receiver/dryer (A), the bracket (B), and the O-rings (C).
3. Install the receiver/dryer in the reverse order of removal, and note these items:
Replace the O-rings with new ones, and apply a thin coat of only recommended polyol ester (POE) refrigerant oil (SANDEN SE-10Y) before
installing them. Be sure to use the correct O-rings for HFC-134a (R-134a) to avoid leakage.
Using the wrong refrigerant oil can be a safety hazard.
