Accord V6-3.0L Hybrid (2005)
Drive Motor Control Module: Service and Repair
IPU Lid
IPU Lid Removal/installation
NOTE: Put on gloves to protect your hands from electrical shock. IMA components are located in this area. The IMA is a high-voltage system. You
must be familiar with the IMA system before working on or around it. Make sure you have read the IMA service precaution before doing repairs or
service.
1. Remove the rear seat back, and seat cushion.
2. Turn the battery module switch OFF.
3. Remove the bolts (A).
4. Remove the IPU lid (B).
5. Install the parts in the reverse order of removal.
6. Before the battery module switch is turned ON, make sure all the high voltage circuits are connected properly. Then push the tab (A) and then turn
the battery module switch ON.